Was your home built prior to 1978?  In Dallas, TX  over 70% of  existing homes were built prior to 1978. So why is that date so important you ask? Well…. 1978 was the year lead was banned as a substance to be used in paints and finishes. Prior to that, lead was used heavily in the production of paints and therefore a large percentage of homes built prior to 1978 have lead-based paint.

The EPA is finally taking a hard stance on lead safety rules. On April 22, 2010, the EPA's Renovation, Repair and Painting (RRP) regulations became effective and will be enforced by the EPA. This means contractors working on homes built prior to 1978 must meet the EPA guidelines for projects that might disturb lead. Contractors must seal the work area, post warning signs, and clean using special equipment. They are required to be certified through the EPA and can be fined heavily if there are infractions.

Many homeowners and real estate agents still don't know about about these new regulations and what it means for their properties, that's why I've decided to write this article.

So why is this important for you as a homeowner or real estate agent?

Lead can affect children’s brains and developing nervous systems. This can result in learning disabilities, reduced IQ, and behavioral problems.  Pregnant women exposed to lead can pass the poison along to their fetus.

Lead can cause hypertension, high blood pressure, and other dangerous and painful ailments.

Lead dust is the most common way people are exposed to lead. It is invisible and toxic. People can also be exposed to lead through lead paint chips and lead found in soil. Lead paint was banned in 1978 for use in residential dwellings.

Lead dust can be disturbed through remodeling and can endanger you and your family.

How do these regulations affect my property?

If you are planning on remodeling your pre-1978-built home, be sure to consider the safety of your family above all.
Our advise: Do not attempt to do the project yourself until you understand the dangers of lead and how to handle it. Only hire a contractor that is certified by the EPA. A certified professional went through EPA training and knows how to keep you and your family safe. Be sure to ask contractors that you interview if they have been trained to perform lead-safe work practices and ask to see a copy of their certificate. They should also provide you with a brochure entitled “Renovate Right”, which was published by the EPA and contains valuable information about lead.  Remember, your health and that of your family is the top priority.

More information on the details of the new regulations can be found here.

http://www.epa.gov/lead/index.html

EGC Custom Homes is a EPA certified firm and all our superintendents and trade contractors have been certified and have undergone the mandatory EPA training. So if you decide to hire us for your project, we can ensure that proper safety practices are followed – not just by us, but also by our trade contractors -to keep you and your family safe.

Written by:

Marc Kleinmann
Principal/Lead Project Manager
EGC Custom Homes & Renovations

 Imagine you could go to Home Depot and for a few hundred dollars purchase an appliance that plugs in like a blender and generates a chunk of the energy your home needs, renewable and emissions-free.

Once a pioneer at Real Networks in Seattle, Chad Maglaque invented the Jelly Fish wind turbine–It’s a 36-inch-tall rooftop wind turbine that you can plug into a socket in your home–no fancy setup required–and generate up to 40 kWh a month, about enough to power a home-full of LEDs or a room full of CFLs. It also comes Wi-Fi and WiMax equipped. He calls it the PC of renewable energy; meaning, the Jellyfish will do for the wind power industry what the personal computer did for the computer industry.

 “The Jellyfish Wind Appliance is a small 36-inch tall vertical-axis wind turbine (VAWT) with a solid-state controller and a variable-speed induction generator that plugs directly into an existing wall socket and automatically generates power whenever the wind blows. The Jellyfish can be mounted on rooftops, wind towers or even existing street light poles – which are already pre-wired to the grid and have the tower already in place! And, it can generate up to 40 kWh per month in moderate winds enough to light an average home using energy efficient light bulbs with a target price under $400 the Jellyfish would be an affordable option for many households and developing communities looking to harness wind power for the first time. His idea is that the utility or the city will subsidize the $400 cost down to $199 or less with tax rebates. One vision is that the Jellyfish may help enable district wind energy co-ops. Neighbors may be able to join together to work with the power utilities:

 Working in tandem with the existing power grid, the Jellyfish enables large-scale distributed-generation, delivering power exactly where it’s needed and reducing the demand for costly transmission infrastructure.”

As a member of the Dallas Green Building Alliance I feel it is necessary to let consumers know what green building programs are in our area.  Green Built Texas has been a valuable resource to the green community for some time now.  All members of the Dallas Green Building Alliance are members of Green Built Texas.

What is Green Built Texas?

Green Built Texas is a voluntary partnership of local home builders, industry supporters, and sponsors committed to creating awareness and interest in the construction of higher-performance, lower-impact residential homes in Texas. The program has a construction protocol that Home Builder Association (HBA) members have deemed essential in order for a home to be recognized by the program. Homes built to this protocol conform to higher standards of site management and waste recycling, water efficiency, indoor air quality, energy efficiency, materials, and homeowner education.

Membership in Green Built Texas is open to both Builder and Associate members of the Home Builders Associations in the State of Texas. Through special events and media outreach, the HBA endeavors to make homebuyers more aware of its green building program and its participants. Green Built Texas also provides educational seminars and is affiliated with the National Association of Home Builders (NAHB) National Green Building Program as its certification processes offer an alternative method to Green Built Texas recognition. A similar agreement with the U.S. Green Building Council enables homes built to the Leadership in Energy and Environmental Design for Homes (LEED-H) protocol to enjoy the same benefit.

GBT is better able to serve its members thanks to the resources offered by these national programs. Meanwhile, the national programs benefit from a vibrant state and local initiative serving as a conduit for certification.

The HBA’s goal is to establish a green building program that is recognized by municipalities and consumers throughout the state. Green Built Texas has also established a program for low and mid-rise multifamily construction and will soon create higher levels of green building achievement that will allow builders to advance their building product to meet both consumer desires and their own business plans.

www.greenbuilttexas.com

Benefits of a Green Built Texas Home-click on this link to view benefits

http://www.greenbuiltnorthtexas.com/benhome.htm

Construction Protocol- Click on this link to view protocol:

http://www.greenbuiltnorthtexas.com/documents/GBNT_ProtocolVersion2_official.pdf

So there we were last week…cold, snow, wind and then darkness! There were 1000’s of us that lost power last week and let’s face it there is NOTHING enjoyable about being without power!   We were all out looking for a near by hotel where we could keep warm for the night or bunking up with parents, family and friends.  I mean I like my friends and family as much as the next person but there comes a time when you really just want to be in your OWN HOME! People…there is such a simple solution to this problem!

Install A Residential Generator!

A residential generator is installed permanently outside your home and is available in different sizes. After a power outage occurs the generator starts up automatically, usually within 10 seconds, and will continue to provide power to your preselected circuits.  A smaller generator will supply plenty of power to your refrigerator, lighting, television, computer and furnace or air conditioner. A larger residential generator can handle pretty much everything in the home including large wine cellars, security system and multiple air conditioners or heaters. You will have to talk to your H.V.A.C. provider about the size that best fits your home.

At the office we use and recommend the Lennox Home Generator. The Lennox Home generator performs a 20-minute full speed, self diagnostic test each week to ensure it is performing correctly. Please be aware when shopping for and installing a generator that you have something that is safe and reliable. We always recommend consulting with an electrician or your H.V.A.C. company for advice on what is best for your home as well as having one of them install the equipment correctly!

Summer is around the corner and if another power outage does occur instead of no heat it will be… NO AIR CONDITIONING… and I don’t know one person in Dallas that is ever comfortable with those three words!

As a new member of the Dallas Green Building Alliance, I was picked to start off our weekly blogs for the month of February. Sunday morning rolled around and my blog was due Tuesday, so I was starting to sweat it! Well as I was sitting at my breakfast table, drinking a cup of coffee sifting my way through the World Wide Web, an idea dawned on me. “That’s it!” I said to myself. My first blog has to be about a green system that will put some cash back into the consumer’s wallet. Instantly, net metering came to mind.

What is Net Metering? It is a provision that allows consumers to connect their alternative energy source (like wind or solar power) to the electrical grid. The consumer will first use the energy they have created before consuming energy from the electrical grid. This will ultimately reduce your energy bills dramatically and relieve some of the stress on the electrical grid, especially in peak hours. The Ultimate goal with net metering is to generate enough renewable energy to self-sustain your own energy consumption. If you are supplying more than is needed, than the excess energy is fed back through your meter to the electrical grid, and you are given credit. Not to mention, to help get your started, Uncle Sam issues a tax credit of up to 30% of the total cost of the system, so you will be receiving a savings instantly!

Check out this Video on Net Metering!

Written By:

Wesley Scott

Archways & Ceilings Made Easy

www.archwaysandceilings.com

(Resources: Photos from isolarpowerforhomes.com & solar-panel-homes.net)

The first question many of our client’s ask after we suggest they look at Geothermal systems is, “How much does it cost?” There seems to be a misconception out there that Geothermal is only something that very wealthy people can afford and if you don’t fit in that category then Geothermal is not something to consider. Well, I am here to set the record strait and let you know that Geothermal is something that many homeowners can afford and the idea that Geothermal is only for the wealthy is just plain WRONG!

I will say that the initial cost of installing a Geothermal system is more than that of a conventional system and when some people see the cost of the initial install it can be a bit of a jaw dropper but when they sit down and look at the numbers and the amount of time it takes to get a return on your investment then it all starts to make sense.

I’ve created and example of a price analysis that we might include in a proposal to a perspective Geothermal client. The analysis was created for a new, 2,500 sf home.

1. Install of a conventional 15 SEER system – $12,500.00
2. Additional cost for Geothermal – $19,500.00
3. Total Investment to install Geothermal – $32,000.00
4. 30% Federal Tax Credit – $9,600
5. Total additional cost for Geothermal after tax credit – $9,900.00

After the tax credit the total additional investment in a Geothermal system is $9,900.00. Yes, that still seems like a bit more but now let’s look at how fast you will receive a return on that investment. On average a Geothermal system has a life span of twenty years compared to a conventional system which on average of 15 years. So above you saw what you have to pay out but let’s take a look at what you will get.

1. Average monthly savings in your electric bill  - $325.41
2. First year savings – $2,361.86 (or 33 trees)
3. First year ROI – 23.857%
4. Estimated lifetime savings – $78,097.29 (or 661 trees)

After the third year you will have saved $7,445.78 by using Geothermal and by the fourth year $10,179.93, which means that you have seen a 100% ROI by the fourth year of using your Geothermal system. So now not only are you doing what is best for the environment you are doing your wallet a favor too!

(Photo by Muffet)

Here’s a quick and easy way to save water. Try this do-it-yourself trick for your toilet tank.

Simply take two empty plastic bottles and weigh them down with either sand or pebbles (about 2”). Be sure the bottle fits the height of your tank. Then, screw on the lids and put them in your toilet tank away from the operating device. When the toilet is flushed, the tank will not fill up with as much water.

Julie Zidell

In one of our recent projects, we installed a rainwater harvesting system that captures 100% of the roofs’ runoff water. The water is captured through gutters and then routed into a 16,000 gallon tank. For this purpose we installed a “trunk line” all the way around the home’s perimeter. All the downspouts of the gutter system “feed” into this trunk line which is connected to the tank. The water is pushed into the tank by gravity and then pumped out when needed. One important aspect of the system is the pre-filtering system, on this project we used a product called “Gutter Foam”. You can find details about their product at http://gutterfoam.com. You can see in the picture that the foam piece is wedged in the gutter and prevents any debris from entering the system.

The tank is a galvalume tank with interior liner set on a sand & gravel base. It has a backup line from the city water meter in case the water level ever drops too low. At this point the backup kicks in and fills the tank to minimum level with city water. Water is pumped out of the tank with a Grundfos pump and filtered through a UV-filtration system. That way the water will not carry and “foul” odor, especially if it is used for toilets or exterior water faucets. In this home the rainwater harvesting system supplies 100% of the irrigation water and 100% of the water for all toilets and the washing machine. This dramatically reduces the use of city water and also helps with managing drainage around the homes’ perimeter.

One of the bigger financial benefits of installing a geothermal system is the tax credit that you will be eligible to receive. When the Energy Improvement Act of 2008 was passed it offered a one time tax credit of 30% of the TOTAL investment for homeowners who install residential ground loop or ground water geothermal heat pumps. So let’s say for instance you install a geothermal system at your home and the total cost is $32,000.00 the tax credit that you will receive is $9,600.00! That’s not bad! Doing what is best for the environment and getting money back from Uncle Sam to do it!

To qualify for the credit the system must meet or exceed EnergyStar requirements and be installed after December 31,2007. Units that were installed in 2008 are subject to a $2,000.00 cap on the credit. If the unit was installed from 2009-2016 then the homeowner can take advantage of the full 30% uncapped credit. Covered expenditures include labor for on site preparation and assembly or original system installation and for piping and wiring to connect the system to the home. The structure must be located in the United States and used as a residence by the taxpayer, although primary residency is not required.

Homeowners can file for the credit by completing tax form 5695, which has yet to be published for the 2009 tax year. The tax credit can be used to offset both regular income taxes and alternative minimum taxes. If the federal tax credit exceeds tax liability, the excess amount may be carried forward into future years. The tax credit will be available until December 31, 2016.

This tax credit “The Energy Credit” can also be applied to solar-electric systems, solar water heaters, and wind turbines. If you are thinking about using alternative energy sources then this is a good time to move forward. The tax credit gives you a little bit more incentive to “Go Green” with your energy systems.

For more information and to see a draft of the Form 5695 you can visit the IRS website.